|
Download this data sheet in pdf format |
Product Data Sheet
For Flex-Ease Marine
Flexible Epoxy Resin System |
|
|
MANUFACTURER
Advanced Repair Technology
PO Box 510
Cherry Valley, New York 13320
(607) 264-9040
|
|
|
PRODUCT DESCRIPTION
Flex-Ease is a two component amine-based repair material designed
specifically for strength and flexibility. Engineered to move with
the natural expansion and contraction of various natural and
synthetic materials, Flex-Ease offers outstanding long-term
performance. Excellent modeling and tooling properties make
Flex-Ease the ideal choice for the professional or casual user.
|
|
|
BASIC USES
Flex-Ease can be used on both vertical and horizontal surfaces,
above or below the water line. Common applications include fillet
bonding, keel to hull repair, large or small gouge filling, bonding
of dissimilar materials. Flex-Ease is suitable for bonding and
filling fiberglass, metal, and composite materials.
|
|
|
APPLICATION LIMITATIONS |
|
|
|
(A) Do not apply over damp or contaminated/decayed surfaces.
(B) Designed to be used in concert with Prime-A-Trate Flexible Cell
bonding primer as a wetting agent.
(C) Not designed for wetting fiberglass cloth.
|
|
|
COLOR
Controlled mixing system turns amber after proper blending. Staining
can be achieved by adding dry pigment during the mixing process. Gel
stains can be used after curing.
|
|
|
TECHNICAL DATA
Refer to table below for typical properties*
* For information only. Not for specification purposes. |
|
|
|
Performance Properties |
Results |
Test Method |
|
Mix Ratio, by volume |
2 to 1 |
|
|
Mixed Viscosity, cps |
Paste |
|
|
Tensile Strength, psi |
7,500 |
ASTM D-638 |
|
Flexural Strength, psi |
16,500 |
ASTM D-790 |
|
Compression Strength, psi |
14,000 |
ASTM D-695 |
|
Elongation, % |
6.0 |
|
|
Hardness, Shore D |
7 5 |
|
|
Coefficient of Thermal Exp., in/in |
60 x 106 |
ASTM D-1674 |
|
Linear Shrinkage, % |
<1% |
ASTM D-2566 |
|
Peel Strength, pi |
30 |
ASTM D-1876 |
|
Moisture Absorption % |
10 |
ASTM D-570 |
|
Pot Life, Minutes, 200 gm |
20-30 |
|
|
Specific Gravity, g/cc |
1,02 |
ASTM D-1475 |
|
VOC Content, lb/gl |
0 |
|
|
Chemical/Fuel Resistance |
Excellent |
|
|
Cure Schedule |
70° F for 24 hours |
|
|
|
|
PACKAGING
Flex-Ease is available in 450ml dual cartridge dispensing system
using a heavy or Iight duty dispensing gun. 150ml single cartridge
fits into a standard caulk gun and dispenses both A & B components.
Both dispensing systems are re-sealable.
|
|
|
MIXING
A disposable static mixing nozzle blends the resin and hardener
automatically and thoroughly to facilitate proper dispensing. The
automatic proportioning in the mixing nozzle assures precise,
consistent formulation. Material can also be dispensed on to a flat
surface and mixed by hand using a putty knife.
|
|
|
WORKING TEMPERATURES
45 to 95 degrees Fahrenheit. Avoid working in direct sun light.
Curing time will be extended in temperatures below 45 degrees. (See
graph below.)
|
|
|
 |
|
|
TOOLING
The unique modeling characteristics of Flex-Ease allows for both
vertical and horizontal applications without the requirement for
“dams” or molds to contain the material while curing. Thickening
powders are not needed. In most cases, a simple putty knife can
properly position the material to desired shape. After mixing,
Flex-Ease has an open time of 20 to 30 minutes. After a curing time
of 16 hours, Flex-Ease can be sanded, chiseled or drilled. Shrinkage
during curing is less than 1%.
|
|
|
SAFETY AND HANDLING
Flex-Ease contains no VOCs. Avoid direct
contact with skin. Do not take internally. Consult
Material Safety Data Sheets for complete information.
|
|
|
CLEANING
Immediately remove all excess material from adjacent areas. Properly
mask all adjacent porous surfaces to avoid penetration. For skin
contact, wash with soap and water, household vinegar or citrus oil.
|
|
|
SHELF LIFE
3 years when stored in unopened, original container.
2 years
once opened.
Store in cool, dry area.
|
|
|
AVAILABILITY AND COST
All Products and services are available throughout the United
States via UPS shipments from the home office or by contacting your
local retailer.
|
|
|
WARRANTY
All recommendations, statements and technical data
contained herein are based an tests we believe to be
reliable and correct, but accuracy and completeness
of said tests are not guaranteed and are not to be
construed as a warranty, either expressed or implied.
User shall rely on his own information and tests to
determine suitability of the product for intended
use, and user assumes all risk and liability resulting
from the use of the product. Manufacturer and it’s
representatives sole responsibility shall be to replace
that portion of the product of the manufacturer which
proves to be defective. Manufacturer shall not be
liable to the buyer or any third party for injury, loss, or
damage directly or indirectly resulting from the use
of, or inability to use the product. Recommendations
or statements other than those contained in a written
agreement signed by an officer of the manufacturer
shall not be binding upon the manufacturer.
|
|
|
AGE CURING PROPERTIES
Flex-Ease is formulated with age curing inhibitors. ACI’S block
continued cross-linking common in flexible epoxy systems. ACI’S
prohibit Flex- Ease from becoming brittle over time, protecting the
property of flexural strength (ASTM-D-790) |
|
Download this data sheet in pdf format |
